Parksol

TOF2 Sensor
The sensor is designed to detect and indicate parking space occupancy simultaneously in front of TWO opposite parking spaces. It is recommended for covered parking lots. The Sensor is not ultrasonic. It uses new detection technology based on Time Of Flight (TOF). Indication is RGB Color Changing LED Lights and shows parking place availability information. Additionally, it can provide special switch signal for sensor state indication. This function allows using it in various applications where vehicle detection is needed.

Ultrasonic Sensor without Indicator
The ultrasonic sensor is designed for mounting on the ceiling or a cable channel and detecting the availability of a parking space. It is recommended for covered parking lots. All Parksol sensors have the digital signal processing (DSP), adaptive sensitivity and temperature compensation functions. The sensor transmits the parking space availability information in real-time to the ParkSol system. The system represents the number of free parking spaces on LED screens. Space status is displayed on remote indicator.

Remote Indicator
The indicator PSL/USI is designed for mounting on the ceiling or a cable channel and show the availability of a parking space. It is recommended for covered parking lots. The indicator is connected to the ultrasound or magnetic ParkSol sensors. The system represents the number of free parking spaces on LED screens. The indicator has reflective optics, which ensures good visibility in the parking from long distance even in a sunny day. It has IP66 class. Indications options: red/green, red/blue, only green.

Zone Controller
The controller PCL/ZC is designed for the real-time monitoring of ParkSol sensors parameters. The sensors are connected via the RS 485 interface. The circuit may have up to 127 magnetic, ultrasonic or TOF  sensors. Controllers are interconnected over a 100 Mbit network. The device operates as a separate 3-port hub, so they can be connected in series, one after the other. The controller has 8 freely programmable inputs and 7 outputs and can be connected to the other parking control systems. The PCL/CC modification has a car-counting function.

Wireless Magnetic Sensor
The ParkSol wireless magnetic sensor is designed for street installation and detection of the parking space availability. The installation is easy and cost-effective. Sensors are installed in/on the asphalt or other road pavement. The sensor responds to changes in the earth’s magnetic field change when a vehicle is parked above it. All ParkSol sensors have the digital signal processing (DSP), adaptive sensitivity and temperature compensation functions. The sensor transmits the parking space availability information on real-time to the ParkSol monitoring system and represents it on LED screens.

Gateway for WiFi
The ParkSol Gateway device is the local data collection point of a ParkSol vehicle detection system and its interface to third-party systems.
With easy web based software setup and maintenance, Software is dynamic and updatable and integrates self-configuring, multi hop and self-healing mesh networking protocol.
The unit is design to slide into the ParkSol system or thr third party solution can integrate using industry standrad REST protocols.

WiFi Repeater
The indicator PSL/USI is designed for mounting on the ceiling or a cable channel and show the availability of a parking space. It is recommended for covered parking lots. The indicator is connected to the ultrasound or magnetic ParkSol sensors. The system represents the number of free parking spaces on LED screens. The indicator has reflective optics, which ensures good visibility in the parking from long distance even in a sunny day. It has IP66 class. Indications options: red/green, red/blue, only green.

Monitoring Software
ParkSol monitoring program for parking managers enable more efficient use of the parking space, and reduction of traffic jams. It enables real-time monitoring of the parking situation (availability, temperature changes), and control of parking places (reservations etc.). The system can connect to other control systems (barriers, lighting, ventilation). The program is installed in the user’s existing systems or in a separate server. Server-client architecture works with multi client feature.

• “Scenarios” module – programmed with semi-programming language by drawing logic schemes. The module is taking process events form ParkSol software using logic elements and activating various events.